4.6 What modem/routers can be used with Aconnect ADSL?

Note: If there is no "limitation" stated next to a modem listed below, then it is compatible to be used in Layer2/PPPoE mode as well as both Bridged and Routed modes under Layer 3.


Cisco

  • 827 - Layer 3 Only. Bridged and Routed


Netgear

  • Netgear 602
  • Netgear 604
  • Netgear 632
  • Netgear 814
  • Netgear 824


All other Modems/Routers, you should contact Aconnect directly for compatibility.

Was this answer helpful?

 Print this Article

Also Read

4.9 What encapsulation type does Aconnect use?

1483 Bridge for Ethernet Mode1577 Classical IP for Routed Mode2516 PPPoE Over Ethernet

4.2 I'm switching from another ISP to Aconnect; can I use my existing modem?

Yes, but only if it is a Aconnect approved modem. We are unable to provide Technical Support for...

4.3 Can I use any modem?

No, Aconnect has a list of approved modems that have been tested with the Aconnect ADSL service...

4.7 Can I upgrade my existing Dialup modem to an ADSL modem?

No, ADSL modems are very different technology to any existing dial up modem. If you have an...

4.1 How much faster is Aconnect ADSL than a regular modem?

Aconnect ADSL provides blistering performance compared to older technologies and the following...