If the browser cannot display the web page

 If the browser cannot display the web page:

  • Make sure that the computer is connected to one of the four LAN Ethernet ports or wirelessly to the router.
  • Make sure that the router has full power, and that its WiFi LED is lit.
  • To make sure that the browser does not cache the previous page, close and reopen the browser.
  • Browse to http://www.routerlogin.net.
  • If the computer is set to a static or fixed IP address (this is uncommon), change it to obtain an IP address automatically from the router. 

Was this answer helpful?

 Print this Article

Also Read

Default access information (MAC/WiFi Password/Serial Number)

The label on the bottom of the router shows the login information, MAC address, and serial...

WiFi and WPS

WiFi On/Off button. Pressing and holding this button for two seconds turns the 2.4 GHz and 5 GHz...

If the router does not connect to the Internet

If the router does not connect to the Internet: Review your settings. Make sure that you have...

NETGEAR genie Setup

NETGEAR genie runs on any device with a web browser. Installation with basic setup takes about 15...