Aconnect Phone And Internet > 26-Port Surveillance Switch with 24 PoE and 2 Combo UTP/SFP ports (370W PoE budg...


Product categories


show blocks helper

26-Port Surveillance Switch with 24 PoE and 2 Combo UTP/SFP ports (370W PoE budget)


DGS-1100-26MP (Dlink / Networking – Switch)

SKU: DGS-1100-26MP Category:


The DGS-1100 MP/MPP Series is a range of switches designed to meet the surveillance requirements of small, medium, and

enterprise businesses. Support for high-powered Pan Tilt Zoom (PTZ) cameras, an automatic Surveillance VLAN, and 6 kV

surge protection make the DGS-1100 MP/MPP Series ideal for IP surveillance deployments. A redesigned interface, a range

of diagnostic and troubleshooting tools, and energy efficient technologies provide a flexible solution to your surveillance


Easy to Deploy

An interactive setup wizard removes the complexity from installing the switch for the first time. It allows you to choose the web

interface mode (Standard or Surveillance), the IP address allocation method (static or DHCP), and the administrator

username and password. This completes the initial setup of the switch and automatically configures features such as Loop

Detection, DHCP Snooping, SNMP and Surveillance VLAN. An informative quick start guide shows you how to use the

network diagram, and a network overview is displayed on the next page. D-Link and 3rd party devices are automatically

detected and shown on the network overview page for easy administration.

Surveillance Traffic Optimization

The DGS-1100 MP/MPP Series supports the automatic Surveillance VLAN feature. This automatically detects surveillance

devices and puts them into the Surveillance VLAN, segmenting their traffic from the rest of the network. The ensures security

of the data, but also gives the traffic a higher priority through the switch, reducing the chances of the video freezing or being

delayed on live streams. A single switch can be used for both surveillance and data networks, removing the need for

dedicated surveillance hardware and reducing maintenance costs.

Intuitive Web Interface

A redesigned Surveillance interface makes surveillance features more accessible than ever. The choice between Standard

and Surveillance modes can be made during switch set up, allowing the user to choose the interface that best suits their

requirements. A network overview shows which devices are connected to which ports, and ONVIF device support allows the

switch to recognize both D-Link and 3rd party IP cameras and Network Video Recorders (NVRs). With monitoring,

management, and troubleshooting tools built into a single interface, the DGS-1100 MP/MPP Series provides everything you

need to manage your surveillance network.

Maximum Reliability

The DGS-1100 MP/MPP Series features 6 kV surge protection on all PoE ports to help prevent damage to the network caused

by power surges and lightning strikes. Faulty electrical cabling, faulty network cabling, and lightning strikes can cause

damage to the switch and connected devices. In-built surge protection of up to 6 kV can limit the damage to the switch from 

both indoor and outdoor devices and network connections. This increases network reliability, reduces repair costs and

removes the need for replacement hardware in the event of an electrical surge or lightning strike.

Easy Troubleshooting

The DGS-1100 MP/MPP Series features Loopback Detection and Cable Diagnostics to help network administrators find and

solve network problems quickly and easily. Loopback Detection detects loops in the network, where multiple devices have

been connected to each other and there is a forwarding loop. The switch will identify the port causing the loop and shut the

affected port down to avoid network instability. Cable Diagnostics can be used to remotely test the quality of copper cables,

recognize the cable type, and detect cable errors.

PoE Support

The DGS-1100 MP/MPP Series provides support for Power over Ethernet (PoE), reducing deployment time for IP cameras,

VoIP phones, and access points. The DGS-1100-10MPP and DGS-1100-26MPP support IEEE 802.3bt, providing up to 75

watts on selected ports for the latest high-powered Pan Tilt Zoom (PTZ) cameras. All switches in the DGS-1100 MP/MPP

Series support IEEE 802.3af and 802.3at, providing up to 30 watts per port. This, combined with high power budgets, ensure

all of your critical surveillance infrastructure can be powered from a single switch. 




D-link is a networking equipment industry. It is a worldwide leading designer, developer and manufacturer of both networking and connectivity products. The products are usually for mass consumption, small businesses, medium businesses and enterprise market segments. It is a Taiwanese multinational company which was founded in March 1986 under the name Datex Systems INC. The company later changed its name to D-link corporations in the year 1994. The company’s headquarters is located in Sinhu 3rd road, Neihu district, Taipei, Taiwan. D-link also has offices and regional headquarters in France, Spain, Germany, the United Kingdom, Canada, Russia, Norway, Sweden, Turkey, Netherlands, japan, Vietnam, Singapore and over 90 more countries. Their products are wireless access points, storage, switches, hubs, routers, IP cameras and DSL / cable gateways. The company can be contacted by phone on the numbers 886-2-6600-0123 or fax 886-2-6600-9898.